hi everyone . i have unity 450F after 2years auto going to service mode im try reimage . not fixed im type svc_rescue_state -l show me : 3time's going reboot going normal mode .then reboot and service mode up..
service@CET*********1 spa:~/user# svc_diag ======== Now executing basic state ======== * System Serial Number is: CET**********1 * System Model Number is: Unity 450F * System Friendly Host Name is: CET**********1 * Current Software version: c4dev_PIE_8542R-5.3.1.0.5.008-GNOSIS_RETAIL * Unisphere IP address(es): Unable to determine IP address(es) * FIPS mode: Transitional or error <2> * Boot Mode: Normal Mode * Post Faults: 0x0000 * Backend Faults: 0x0000 * Boot Faults: 0x0000 * Rescue Reason: 0x0000 * Rescue reason for code 0x0000 - No faults detected. * SP Service Hint Code: <None> 02:38:48 service@CET********1 spa:~/user# svc_rescue_state -l
Prior to your reimage did you have any hardware faults? As looking at the output posted you will most likely have to open a support case as there is an issue with your image that needs to be resolved before it can complete.
DELL-Sam L
Community Manager
•
8058 Posts
•
34386 Points
0
0
Posted February 6th, 2026 19:03
Hello Ma6outi,
Do you happen to know your OE version of your unity system?