I am doing SAN copy incremental Push to migrate data from Cx to VNX . 

For one of the Luns it shows -

Copy Descriptor Name: phohpkpac01_sancopy-LU106_LU47

Copy Descriptor ID:  12

Owner:  SPA

Source LUN WWN:  60:06:01XXXXX

Number of Blocks to Copy:  1113232

Number Of Destinations:  1

Destination LUN WWN:  60:06:01:6XXXXXX

Session Status:  The Session has completed successfully and is in an inconsistent state.

Initial Throttle:  7

Current Throttle:  7

Transfer Count:  83886080

Percent Complete:  7535

Completion Time:  07/03/12 17:21:27

Failure Status:  No Failure

1)I ran a initial Bulk copy yesterday using switch -copywholelun -nomark all, some show completed others Inconsistent . what exactly does it mean by  inconsistent state ?

So when i right click and start it it goes to completed state   OR use  /nas/sbin/navicli -h SPB -np sancopy -start -name "host name" ( i.e an increment session ) .

2)why is the percent complete -Percent Complete:  7535 ?

3) Also , Number of Blocks to Copy:  1113232 means -more number of blocks that will be during incremental session & Transfer Count:  83886080 - mean this many blocks already copied .Please correct me if i am wrong .

thanks !