It's Dell Vostro 1014, and it works kind of fine until its plugged off but instantly shuts down if not plugged in (similar to how PCs go out with power outage).
I am not sure how old it is (received by a relative in used condition). It has Dell battery but a non-Dell power adapter. Also the 'power adapter cannot be determined' issue shows up at the boot.
Internal speakers, which i guess I damaged by playing loud distorted sound for long duration of time, for i received the laptop with a working internal speaker.
The lower case, and display cover (the front one), both of which feels like plastic are kind of broken and I want to replace them.
Also, it is working in ATA SATA configuration rather than the default AHCI (whenever in AHCI mode it crashes during my Windows 7 Home Basic Boot)
So what to buy/fix to bring this back to normal working condition?
P.S. I have minimum tools and know-how of opening up of laptop and I am confident with doing replacements (i cannot solder though).
The failure to recognize the adapter is usually caused by either a faulty adapter or a bad DC jack. One or the other would need to be replaced; figure on $30 for an adapter and $20 for a jack.
The plastic parts of the case are inexpensive -- maybe $50 for both -- but the labor involved to replace them is not insignificant in terms of your time (or worse, paying a shop for a couple of hours of work).
If you have to replace the case parts plus the adapter and jack, you're up to $100 -- and that's without the labor. It's about twice what the entire system is worth as well; only you can decided whether the system is worth the cost of repair. You can likely buy a complete used system several years newer than the one you have for less than it will cost to repair this one -- and since Windows 7 is obsolete, the newer system will run Windows 10, which is in-support and therefore secure for use online.
ejn63
12 Elder
•
31594 Posts
•
155521 Points
439
0
Posted March 24th, 2021 07:00
The failure to recognize the adapter is usually caused by either a faulty adapter or a bad DC jack. One or the other would need to be replaced; figure on $30 for an adapter and $20 for a jack.
The plastic parts of the case are inexpensive -- maybe $50 for both -- but the labor involved to replace them is not insignificant in terms of your time (or worse, paying a shop for a couple of hours of work).
If you have to replace the case parts plus the adapter and jack, you're up to $100 -- and that's without the labor. It's about twice what the entire system is worth as well; only you can decided whether the system is worth the cost of repair. You can likely buy a complete used system several years newer than the one you have for less than it will cost to repair this one -- and since Windows 7 is obsolete, the newer system will run Windows 10, which is in-support and therefore secure for use online.