UNSOLVED
S
sketchy000
6 Posts
0
19053
September 17th, 2014 15:00
CLI syntax differences between powerconnect and N3000 series
Just checking to see if there are any syntax differences between the configuration commands on a Dell N3000 switch versus the venerable PowerConnect 6200 series. The latter is baked into my brain, but have not had the opportunity to work with an N3000 switch yet. Any insight would be appreciated.
DELL-Josh Cr
Community Manager
•
9744 Posts
•
44404 Points
317
0
Posted September 17th, 2014 18:00
Hi sketchy000,
They have similar commands, most of them are the same, but there are some syntax differences and new commands. ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/networking-n3000-series_Deployment%20Guide4_en-us.pdf