
Solved!
Go to SolutioniDRAC Web Interface Stopped Working
The front LED was flashing yellow. The server was operating normally.
Looking at he iDRAC web page it shows a critical error - Watchdog has expired. iDRAC web page stopped working. I was able to use the racadm command to reset the iDRAC. The yellow light stopped flashing. A few minutes later it started flashing again and the web interface was not working. The cli shows the following status:
Watchdog Information:
Recovery Action = None
Present countdown value = 0 seconds
Initial countdown value = 480 seconds
So the watchdog is counting down to zero and the iDRAC web interface is not working. Any suggestions?
Responses (0)
Solutions (0)
