UNSOLVED

djjonnyb

updated

21 years ago

D

djjonnyb

3 Posts

0

19319

March 21st, 2005 23:00

hard drives

i need to replace my hard drive on my pc...its an L933r....whats the recomended hard drive to replace it?
  • osprey4

    6 Operator

    34230 Posts

    242

    0

    Posted March 22nd, 2005 00:00

    Any internal drive will do. I don't believe your system will support a drive larger than 120-GB. Look for an EIDE or internal ATA drive, not SATA. You may have to look around a bit to find a drive that small.
  • shesagordie

    12 Elder

    46017 Posts

    242

    0

    Posted March 22nd, 2005 02:00

    djjonnyb.
     
    Any standard EIDE/ATA 7200rpm hard drive, that's no more than 130gb will be suitable, try to buy one with a 8mb cache, check the warranty, there
    are one and three year warranties and some of Seagate's drives have a five year, the best in the business. 
    Don't pay more than 50cents per GB for the drive.  With OEM hard drives, you will get just the bare drive, the retail boxed version will the instructions, software and cable. 
    To go higher than 130GB you will need to install a PCI ATA/100 or 133 controller card and attach the HD to it. The controller card will overcome the limitations of the L Series BIOS.
     
    Bev.
  • BBraxton

    2 Intern

    2037 Posts

    242

    0

    Posted March 22nd, 2005 11:00

    A student for whom I provide support has a hard drive failure SATA but I do not yet have the Dell model number of the system. Which PCs ship with SATA ?
  • shesagordie

    12 Elder

    46017 Posts

    242

    0

    Posted March 22nd, 2005 20:00

    BBraxton.
     
    All except the Dimension 2400 and 3000.
     
    You can also find more product information here
     
     
    Bev.
     
     
     
  • BBraxton

    2 Intern

    2037 Posts

    242

    0

    Posted March 23rd, 2005 10:00

    The student removed the SATA drive (which is RAID) and connected it inside the one Dimension XPS (same) here on campus but the Windows XP Pro did not detect the drive. He may have neglected to set "Auto" in the BIOS setup OR maybe RAID prevents this technique from working.
  • shesagordie

    12 Elder

    46017 Posts

    242

    0

    Posted March 23rd, 2005 15:00

    BBraxton.
     
    Check to BIOS to see if the drive is set to "Auto" [Enabled] and you may have to partition and format it using XP's disk management. Which RAID array 0 or 1?
     
    Bev.
  • BBraxton

    2 Intern

    2037 Posts

    242

    0

    Posted March 23rd, 2005 16:00

    Thank you. I asked the student that and they reported RAID "zero"

    Does that run on a single hard drive? If he were able to mount as secondary drive it would be to copy his documents and files before the hard drive goes away. Dell is replacing the drive itself under warranty.

  • shesagordie

    12 Elder

    46017 Posts

    242

    0

    Posted March 23rd, 2005 19:00

    BBraxton.
     
    RAID 0 [Striping] hard drive cannot install it as a single hard drive, because all the data has been lost, therefore you will have partition, format, reinslall XP, drivers and applications on the drive.
     
    Reading this post should help you with the Pros and Cons of RAID 0 & 1
     
    Bev.
  • djjonnyb

    3 Posts

    242

    0

    Posted March 23rd, 2005 23:00

    would you know a good site where i can find one that will work for my pc?
  • shesagordie

    12 Elder

    46017 Posts

    87

    0

    Posted March 24th, 2005 00:00

    djjonnyb.
     
    You will obtain the best price looking for specials at computer stores, such as Frys, Best Buy, these should have good rebates on EIDE/ADA hard drives.
     
    Bev.