Can't start Hyper-V virtual on R710 using Server 2012 R2
I have multiple R710 servers that are Hyper-V virtual hosts and running fine but I have one server that I can install Hyper-V on it and create a virtual but I can't start it. I have all Windows Server 2012 R2 updates installed. I have upgraded to the latest BIOS 6.6.0. I have upgraded to the latest PERC firmware. The virtualization technology setting in BIOS is enabled. The error says "Virtual machine 'SERVER1' could not be started because the hypervisor is not running." I have gone through everything I can find to make this work but no. I don't know why this one R710 is not working when the others do work. Any help is appreciated.
I would start with seeing if there is anything hardware wise on the server that isn't compatible with Hyper-V, such as processor type, etc. If you would could you Private Message me the svc tag of the non working R710, as well as a tag for a working one? That way I can verify compatibility.
Thanks.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
2233
0
Posted March 20th, 2020 05:00
Tom Steuver,
I would start with seeing if there is anything hardware wise on the server that isn't compatible with Hyper-V, such as processor type, etc. If you would could you Private Message me the svc tag of the non working R710, as well as a tag for a working one?
That way I can verify compatibility.
Thanks.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!