Unsolved
This post is more than 5 years old
96 Posts
0
16192
Trying to recover data from dead laptop hard drive.
I'm trying to recover data off a Latitude C610 (IBM Travelstar Model No. #ic25n030atcs04-0) 30 gig drive using an adapter that plugs into a working drive but before I can plug in the adapter I have to set the laptop drive to slave but on the drive there are no settings listed on the drive. There is a jumper diagram but doesn't have anything listed for slave or master. I've also checked IBM's site and there isn't alot of information.
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
December 1st, 2005 13:00
It's all but impossible to find the tiny jumpers these drives need - if the adapter doesn't have a jumper on it, just put the drive in as master.
bosston
96 Posts
0
December 1st, 2005 20:00
bosston
96 Posts
0
December 2nd, 2005 11:00
bosston
96 Posts
0
December 2nd, 2005 11:00
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
December 3rd, 2005 17:00
http://www.geeks.com/details.asp?invtid=HD-108&cat=HDD
bosston
96 Posts
0
December 3rd, 2005 19:00
Renmazou
29 Posts
0
December 5th, 2005 13:00
bosston
96 Posts
0
December 5th, 2005 22:00