Unsolved
This post is more than 5 years old
6 Posts
0
140874
5110cn, transfer roller, reset?
I've got a new transfer roller on order from Dell for the 5110cn, but the printer is dead until then. Any way to reset this so I can keep printing for a few days, even if quality is not as good?
brooksby1
2 Posts
2
November 14th, 2012 07:00
There are two tabs on the back of the transfer roller. Release these and push the white gears on the top right as you are looking at the unit from the tab side. Push the white gear to the left to unseat it and then remove the assembly. Vacuum out the toner and clean the window and then reassemble. Will work like a charm.
brooksby1
2 Posts
1
November 15th, 2012 16:00
There are two tabs on the back of the transfer roller. Release these and push the white gears on the top right as you are looking at the unit from the tab side. Push the white gear to the left to unseat it and then remove the assembly. Vacuum out the toner and clean the window and then reassemble. Will work like a charm.
Petey4335
1 Message
0
August 7th, 2013 07:00
You sir are a time and money saver. Worked like a charm. I was amazed at the amount of toner that was in the transfer roller.
peterhuppertz
2 Posts
0
October 5th, 2013 16:00
You're a gun.
Like the previous poster, I was amazed at the quantity of toner in the transfer roller unit. The printer is working like it just came out of the box.
Thank you, thank you. Thank you.
Chrispy.Cannon
1 Message
0
May 22nd, 2016 07:00
Thank you - I was stuck on a Sunday trying to print and this saved me - great help
tru9740
1 Message
0
September 1st, 2018 21:00
This was an incredible help. Dude you just saved me at least $109. Thank you so much.