Unsolved
This post is more than 5 years old
6 Posts
0
56114
Visio Shapes/Stencils for PowerEdge Hardware...
I'm finishing up some rack diagrams, but still need a few shapes/stencils in order to complete them. I've searched everywhere I can think of, but still cannot locate the following:
PowerEdge 1750 with three 3.5-inch drives - horizontal, one row of three
PowerEdge 1950 with two 3.5-inch drives - horizontal, one row of two
PowerEdge 2550 with four 3.5-inch drives - horizontal, two rows of four
PowerEdge 2850 with six 3.5-inch drives - horizontal, two rows of three
PowerEdge 2900 with ten 3.5-inch drives - left, vertical, to columns, right, horizontal, four rows of two
PowerEdge 2950 with six 3.5-inch drives - horizontal, two rows of three
Unfortunately, for the aforementioned devices, I'm only able to find either "cartoonish" shapes, actual pictures, or models that don't match the devices exactly. All of which have the front bezels on, which I do not want...in addition to not having a rear view as well. Any help would be greatly appreciated. Thanx.
sankar_cr
2 Posts
0
August 3rd, 2010 05:00
Hi
Please share me the Visio Stencils for Dell Power Vault TL 2000 / 4000 storage
Thanks and Regards,
C.R.Sankar
Enterprise Technical Support
Dell | India, Bangalore
Dell India Enterprise Expert Center (EEC)
ttrenerry
2 Posts
0
October 22nd, 2010 13:00
Did you ever find the shapes/stencils for the servers above?
I'm currently looking for rear images of 1950, 2850, 2950, and 1850 servers for my visio documentation.
Thanks
Tammy Trenerry
Network Manager
NXGEN A Transaction Company
LeVar.Albright
8 Posts
0
November 1st, 2010 18:00
Matt_McG
1 Message
0
September 24th, 2014 13:00
I would like them as well.
Matt McGlone
Network Admin
TSI, Inc.