Also, I've had the suggestion that I should upgrade the firmware (even though I do have the latest according to the Dell site), but I cannot figure out how to do this, there is no specific Array Manager for 2008 R2, it's incorporated in to Server Administrator and there is no update firmware option.
Any further assistance would be greatly appreciated.
XpertaUser
7 Posts
0
October 20th, 2011 09:00
I've checked the cooling modules and fans and they are fine.
As I said, the readings on the probe is 5 degrees, no where near the 50 degree failure point.
I've attached a screenshot.
I've tried power cycling the device, but the failure persists.
XpertaUser
7 Posts
0
October 20th, 2011 09:00
Oh and I meant the reading is 25 degrees, my keyboard is playing up.
XpertaUser
7 Posts
0
October 20th, 2011 09:00
Link to the screenshot:
imageshack.us/.../unledqnf.jpg
XpertaUser
7 Posts
0
October 26th, 2011 08:00
Hi
Sorry for not coming back to you.
I have the latest firmware - E.19, although within Server Administrator it only displays this on one EMM.
I've attached 2 screenshots:
EMM - imageshack.us/.../emmq.jpg
Temperature failure - imageshack.us/.../tempcon.jpg
Also, I've had the suggestion that I should upgrade the firmware (even though I do have the latest according to the Dell site), but I cannot figure out how to do this, there is no specific Array Manager for 2008 R2, it's incorporated in to Server Administrator and there is no update firmware option.
Any further assistance would be greatly appreciated.