Unsolved
This post is more than 5 years old
9 Posts
0
17193
t3600 drive activity light connection?
I received my t3600 yesterday and the twisted black/red wires leading from the PERC H310 were not connected to anything (the card itself was flopping around inside the case, but that's a different story). I assume the wires are for the drive activity light. Where does it connect?
speedstep
9 Legend
9 Legend
•
47K Posts
0
August 15th, 2013 05:00
A 2 Pin connector for LED would be for SCSI controller not a PERC RAID.
For that the Disk carriers would have individual activity lights so that you can tell which one is bad.
ftp.dell.com/.../poweredge-rc-h310_User%27s%20Guide_en-us.pdf
atl001
9 Posts
0
August 15th, 2013 06:00
Thanks for the response. On the PERC card, it is labeled "SAS ACT LED", so I think it is supposed to be the activity light. But in any event, where on the motherboard or in the case does it connect?
There is a connector on the motherboard labeled "AUX_LED" that I am tempted to plug it into, but the t3600 manual says it is the "Front panel audio connector" (connector 14 on page 36 of the owners manual).