Here are the console logs...

Network Ready
08/05/13-10:59:26 (GMT) (sasCheckExpanderSet): NOTE:  Expander Firmware Version: 0116-e02c
08/05/13-10:59:26 (GMT) (sasCheckExpanderSet): NOTE:  Expander SAS address: Hi = x50022194 Low = x87f70210
08/05/13-10:59:41 (GMT) (tRAID): NOTE:  SAS: Discovery2 Complete Time: 30 seconds
08/05/13-10:59:41 (GMT) (tRAID): NOTE:  ion: Peering Disabled (Alt Unavailable)
08/05/13-10:59:41 (GMT) (tRAID): NOTE:  WWN baseName 000c0022-1987f702 (valid==>SoftRst)
08/05/13-10:59:41 (GMT) (tRAID): NOTE:  spmEarlyData: Using cached data
08/05/13-10:59:41 (GMT) (tRAID): NOTE:  sasEnableInterface: Enabling Host Interface for channel 2
08/05/13-10:59:42 (GMT) (tRAID): NOTE:  IonMgr: Host Interface Enabled
08/05/13-10:59:42 (GMT) (tRAID): NOTE:  CCM instantiation starting.
08/05/13-10:59:42 (GMT) (tRAID): NOTE:  CCM instantiation complete
08/05/13-10:59:42 (GMT) (tRAID): NOTE:  CCM Listener Registration started.
08/05/13-10:59:42 (GMT) (tRAID): NOTE:  CCM Listener Registration complete.
08/05/13-10:59:42 (GMT) (tRAID): NOTE:  rpaBattMgr listener registration starting.
08/05/13-10:59:42 (GMT) (tRAID): NOTE:  rpaBattMgr listener registration complete.
08/05/13-10:59:44 (GMT) (ssmEventProc): NOTE:  CCM BMG: Battery is low
==============================================
Title:    Disk Array Controller
          Copyright 2005-2008, LSI Logic Corporation

Name:     RC
Version:  06.70.15.60
Date:     02/13/2008
Time:     22:50:30
Models:   1331 1332 1333
Manager:  devmgr.v0970api01.Manager
==============================================

08/05/13-10:59:47 (GMT) (tRAID): NOTE:  Volume discovery...
08/05/13-10:59:47 (GMT) (tRAID): NOTE:  Scanning usable NATIVE drives
08/05/13-10:59:48 (GMT) (tRAID): NOTE:  evf - Peering Disabled (Alt Unavailable)
08/05/13-10:59:48 (GMT) (tRAID): PANIC: SOD failure in evfInitFinish
àüààüàüàüààààüààþàþüàüþüààüüpþüÿüðüàüüààþþpðüþüüüàààðàðàüþüààüüàüàààðààüðàüüøüðüààààüþàüðàþüüpðàüüþüüÿüà->

Current date: 08/05/13  time: 02:44:23

#################

After this the controller reboots...

#################

Power-Up Diagnostics - Loop 1 of 1
3600 Processor DRAM
     01 Data lines                                                  Passed
     02 Address lines                                               Passed
3700 Buffer DRAM                                                     Skipped
3300 NVSRAM
     01 Data lines                                                  Passed
5900 Ethernet 91c111 #1
     01 Register read                                               Passed
     02 Register test                                               Passed
3A00 NAND Flash
     06 Bad Blocks Test                                             Passed
2310 Application Accelerator Unit
     01 AAU Register Test                                           Passed
6D20 VSC 7153 SAS Expander                                           Skipped
5700 Subsystem Lines                                                 Skipped
4412 Interrupt Tests                                                 Skipped
6D00 LSI SAS 1068 IOC--Base Board
     01 IOC Register Read Test                                   ** Failed **

***  Error (0001): Register data miscompare

      Address  Expected  Observed  Info
       0006       30        38

***  Current Loop Count: 1    Date: 08/05/2013    Time: 11:02:47

***  Master Error Code: 1331-6D00-01-0001

Do you still have access to the GUI management console? If so I would like to get a support bundle as there are a number of things that could cause this, as it looks like you are in a boot loop. I will send you a direct email so you can reply and send me the zip file when you get it. Please let me know if you have any other questions.