Unsolved
This post is more than 5 years old
34 Posts
0
67109
Disable NIC in the BIOS Power Edge R420
Hi
Can anyone advise how I can disable the second NIC on the poweredge R420
I have been all through the bios and I can see where to disable it, is it possible ?
John
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
February 15th, 2014 13:00
Hello John
No, because there is not a second NIC. The R420 has an integrated dual port LOM/NIC. There is not a configuration option to have a second integrated NIC. If you have added a PCIe NIC to the system then you can disable it through the PCIe slot disablement option.
Thanks
sytner2012
34 Posts
0
February 15th, 2014 13:00
Hi
I am not familiar with the integrated dual port LOM/NIC. When I install Windows 2011 I can see what looks like two NIC's to me
J
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
February 15th, 2014 14:00
What you are seeing in the operating system is a port. You are seeing something listed like NIC1 and NIC2. Those are the two ports/interfaces. They are part of a single Network Interface Card. What you disable at a BIOS level is the card, not the interface or port.
Thanks
sytner2012
34 Posts
0
March 2nd, 2014 05:00
As I am installing SBS2011 as part of a SBS 2003 to 2011 Migration I need to ensure that I only have 1 NIC enabled
I have two physical NIC's on the server
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
March 2nd, 2014 06:00
I can't say on the R420, but on the older servers, you could disable either NIC/port in the BIOS. If you can't do that on this server, you will just need to disable it in the OS.