Unsolved
This post is more than 5 years old
3 Posts
0
1629
PowerEdge T105 integrated graphics adapter broken
Dear forum members,
I hope somebody could give me some advice. The integrated VGA (ATI ES1000) gave up, the system gives a long and two short beeps at POST. There is no video output, not even at the BIOS. Apart from this it seems that the operation system loads (I concluded it from HDD activity).
Is there any way to disable the integrated graphics adapter when I add an external PCI express graphics card? Actually I have done it before, and it worked well, but later I removed the added graphics card. Now I inserted it again, but this time there is no video output.
Any advice how can I recover my system?
Thanks,
Laszlo
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 5th, 2016 10:00
Hello.
Do you see any code displayed on the LED diagnostic indicators? You can disable the on-board video by entering the BIOS set up using F2 key -> Integrated Devices -> Embedded Video Controller -> Disabled.
lcsaszar
3 Posts
0
April 5th, 2016 12:00
Hi, the lights sequence is: 34, 234, 24 (beep -..), 24, 12, 1234
How can I disable the integrated adapter without seeing the screen?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 6th, 2016 09:00
Code 24 suggests possible video failure. What happens when you remove the add-in graphic card?
lcsaszar
3 Posts
0
April 6th, 2016 11:00
What I wrote is without the add-in card, trying to use the integrated VGA. But it is the same with a graphic card installed in a PCI express slot.
Laszlo