Unsolved
This post is more than 5 years old
1 Message
0
4096
Dell optiplex 390 mobo
So I scrappedited a motherboard and cpu for my personal rig, but when I went to put the front panel power switch and lights I realized that the case I took the mobo out of only used a 5 pin wiring for the power switch, hddled, reset switch and pled, where as this case uses 8 pins for it.
In the top right of the mother board it has the 5 pin connector labeled pwrswi but on the lower right (where the front panel things would usually connect it is labeled ledhi. Any idea as to how I am supposed to connect them
speedstep
9 Legend
9 Legend
•
47K Posts
1
June 23rd, 2016 07:00
Pinouts are not published ever.
You will have to get a power button cable.
Dell Optiplex 390 3010 MT Power Switch Button Cable 074XPK 74XPK
http://www.dell.com/support/article/us/en/04/SLN296201/EN