This post is more than 5 years old
2 Posts
0
1277
Firmware Upgrade
I am upgrading the OE on an AX100. One of the preliminary steps is to upgrade the firmware on the Brocade 3250 FO switch. I am going from version 4.2 to version 5.1. I am told I must fist go to version 4.4 and then to 5.1. Has anyone had experience with this upgrade?
Thanks
Thanks
Ed Schulte
148 Posts
0
December 12th, 2006 04:00
First of all see thread "OE upgrade", you posted for the upgrade path.
Second, there is only one reason why EMC is "stingy", that is because the upgrade needs "officially" to be done by EMC people and not by a customer. This doesn't mean that the customer is not compotent to do it. But because if there is a support issue, it is not the cusotmer who is to blame.
cheers,
Ed
sysmgr1
128 Posts
0
November 27th, 2006 08:00
sysmgr1
128 Posts
0
December 13th, 2006 07:00
"compotent" ? "cusotmer" ?
Thanks. I feel much better now about who does the firmware upgrades.
Ed Schulte
148 Posts
0
December 14th, 2006 00:00
As long as the technical content is correct and your firmware upgrade is correct, we don't have to worry about spelling errors.
(by the way, found the spell checker on the forum, that is a handy tool... :->>>>)
cheers,
Ed