Hi All,

Do Unity provide link aggregation for iSCSI?

can we use on one IO module 2 ports for iSCSI and 2 ports for file? is it possilbe

Dear John,

Thanks for answer. Link aggregation is available in VNX/VNXe for iSCSI or its not supporting in any other vendor product for iSCSI?

Could you please provide me steps to provide FC storage to host with zoning.

Hi, Instead of Link aggregation, you may use multioath iscsi for client to target, on Host iscsi configuration

Hello,

I'm confused with module 3 (Hardware) quizz question 8  : What is the available number of DIMMs on a Unity 600F ?

I thought that it was 8 : (8 x 32 GB) = 256 GB.  But 8 is given as incorrect answer.

Could you clarify ?

Thanks.

Damien.

Hi, Jhon

Have I few questions need your clarifications?

1. At which stage in the Unity power up sequence would the Storage Processor enter Service mode upon

detecting an error? is it post or After the CMI is started.

2. A system administrator receives a warning that their DPE I/O Module has a fault. In this situation, which

type of replacement is required?

3. what is the difference b/n CRU and FRU and could you specify the unity items under non-CRU and Non-FRU