Unsolved
This post is more than 5 years old
30 Posts
0
928
IPv6 - communication port 11111
Hi there,
we found in the Network trace that the XMS is regularly trying to connect all of the XtremIO Controller's over Port 11111.
But only can connect to one of them. All other connection attempts fail. The XMS and the SC's are in the same subnet.
In the Storage Array Site Preparation guide this port is mentioned as only been used with IPv6 (page 36).
So I've the following three questions:
1. why are only connection attempts to one and the same SC successful?
2. what is the purpose of this connection?
3. how can we disable IPv6 communication?
any ideas and help is appreciated
Tom
Kumar_A
727 Posts
0
February 26th, 2016 14:00
Do you have an SR open for this with EMC Support?
vPert
30 Posts
0
February 29th, 2016 00:00
No we haven’t opened an SR yet.
Von: Avi
Gesendet: Freitag, 26. Februar 2016 23:18
An: Tom Schmuki
Betreff: Re: - IPv6 - communication port 11111
ECN
IPv6 - communication port 11111
reply from Avi in XtremIO - View the full discussion