Unsolved
This post is more than 5 years old
9 Legend
•
30.3K Posts
1
212533
How to login to your wireless router
Here are instructions to login to your wireless router.
Hit the Windows Key and the R key at the same time. This will bring up the Run prompt.
Type CMD and then hit Enter.
Type
ipconfig /all (space between the g and /)
and hit Enter. Look for the Default Gateway, should look something like 192.168.1.1 but can be different depending on the wireless router and manufacturer.
Open Internet Explorer or your browser and enter the Default Gateway number into the Address Bar in your browser and hit enter.
You should see a login screen. You must enter the Username and Password to login. On most wireless routers they are...
Username = admin
Password = blank or password
but these can vary on the manufacturer. Please consult your wireless routers installation instructions for the correct information.
I highly recommend that you use these Recommended Wireless Router Settings in your wireless router to make connecting work at its greatest.
If you still have problems, the please post in the Dell Networking, Internet, Wireless Forum
If you find this Wiki helpful, please vote above. Thanks.
armxx048
1 Message
0
June 5th, 2018 08:00
I am using Comcast Xfinity router. the login url 192.168.1.1 is not working on my pc ? How do I login into my router?
Answer: You can go to this blog fro more info about logging into the wifi router: 10-0-0-0-1.org
machrit144
1 Message
0
August 24th, 2018 17:00
Not necessarily all the router will be using 192.168.1.1 as the default login address. My apple router uses 10.0.1.1 as the default login address
smithjohn247
1 Message
0
October 23rd, 2018 22:00
You can use these steps which I find on Google-
Dahlia Ingram
1 Message
0
December 7th, 2018 23:00
I have a Linksys WRT3200ACM AC3200 MU-MIMO Gigabit Wi-Fi Router, and I found that it is using 192.168.1.254. But I have a question that how to improve its speed I searched a lot on the internet but don't get any solution. here
evabrown
1 Message
0
January 2nd, 2019 22:00
The login or setup process of a router is not so tough. If you get proper guidance this will be easy enough. You must change Netgear router password frequently for the security.
DavidLayman
1 Message
0
January 25th, 2019 04:00
When i login Comcast xfinity router, i had entered 10.0.0.0.1 into browser and i am unable to login. But after reading this 10-0-0-0-1.info blog i realize this is wrong ip address correct is 10.0.0.1.
helin121
1 Message
0
April 14th, 2019 23:00
10.0.0.0.1 or 10.0.0.1 both used as comcast and xfinity router default ips and you can get further information on this here. 10-0-0-0-1-ip.com
richardgroover
4 Posts
0
June 20th, 2019 00:00
The login or setup process of a router is not so tough. If you get proper guidance this will be easy enough. You must change the Netgear router password frequently for the security. You can get further information on this here. 192.168.1.1
richardgroover
4 Posts
0
June 20th, 2019 00:00
The login or setup process of a router is not so tough. If you get proper guidance this will be easy enough. You must change netgear router password frequently security.
You can get further information on this here. 192.168.1.1
penik
9 Posts
0
June 26th, 2019 01:00
The login or setup process of a router is not so tough. If you get proper guidance this will be easy enough. You must change the Netgear router password frequently for the security. You can get further information on this here.1921681001.net