Unsolved
11 Posts
0
452
Migrate hardware from PE2900 directly to T610
Hello everybody,
I have an old PE2900 which reports errors on the backplane and I was wondering: I know that I can migrate directly to a PE2950 (RAID-configurations can be imported from PERC 5 to PERC 6 or from a PERC 6 to another PERC 6).
Will the same "trick" work when I try to migrate directly to a T610? Of course, when the T610 is equipped with a PERC 6, the trick should work, but will it also work with a T610 equipped with a H700 controller?
Thank you in advance for your replies/advice!
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
August 12th, 2019 05:00
M_w_mol,
The H700 does indeed support migrating from the Perc 6/i, but only for non bootable Virtual Disks, as seen here.
Hope this helps