reallocation of recover point DR site and chane ip's

Question

Hello , we are planning to shutdown the recover point and move it to new location . this RP cluster that will be moved is joined to the production RP cluster and replication is fine between them . after we move it , we will change the ip's of lan and management and wan ip's will still the same . After power up at new site , how can i change to new ip's ? should i open any new firewall ports between running RP cluster and lan and management ip's ? as i mentioned before wan ip's will not be changed  . should i re join the RP in DR site again after changing the ip's of lan or no need for this ? Thanks in advance

DellEMCSupport · Answer

Hello Mahmoud Mohamed,

Here is the link to the administrator guide for RecoverPoint. If you look in Chapter 5 in the storage section it explains about changing ipaddress. https://dell.to/377TkY1

Please let us know if you have any other questions.

Mahmoud Mohamed · Answer

Hello ,  Thanks for your support , but i have checked the Admin guide , it show options related to  storage box's discovered in RP . i need to change the ip's of RPA cluster itself  Regards

Muhammad_Toffaha · Answer

Hi Mahmoud,

Regarding the change of management IP's please follow the steps in Chapter 8 -Modifying cluster settings

RecoverPoint-Installation-and-Deployment-Guide

Hope that helps,

Muhammad Toffaha

Senior Technical Engineer- RecoverPoint and RecoverPoint for VMs

@vtoffaha

muhammad.toffaha@dell.com

RecoverPoint

Was this post helpful?