Unsolved
This post is more than 5 years old
4 Posts
0
43493
Install XP on SATA system with no floppy
Hi, I am wanting to reinstall WindowsXP on my new Dimension 8400. However, I noticed that in order to do so, Windows needs the raid drivers to see my SATA Hard Drives. I consulted Dell's site and found an article on how to do this easily with a floppy drive.
However, my 8400 did not come with a floppy drive. Furthermore, there is not a floppy driver controller on the motherboard (except maybe via usb). Surely there is some other way to provide the Windows setup these drivers other than wasting $40 on a usb floppy drive...
I have an external USB Hard drive if this will work, or could I burn the drivers to a cd instead? or even add the files to the XP install cd (and reburn it, similar to the slipstreaming of sp2)?
I can't imagine that I would be the only one with this problems, since SATA is standard on the 8400s and so is not having a floppy drive.
Thanks for any help/ideas you many have
However, my 8400 did not come with a floppy drive. Furthermore, there is not a floppy driver controller on the motherboard (except maybe via usb). Surely there is some other way to provide the Windows setup these drivers other than wasting $40 on a usb floppy drive...
I have an external USB Hard drive if this will work, or could I burn the drivers to a cd instead? or even add the files to the XP install cd (and reburn it, similar to the slipstreaming of sp2)?
I can't imagine that I would be the only one with this problems, since SATA is standard on the 8400s and so is not having a floppy drive.
Thanks for any help/ideas you many have
criz8426
4 Posts
0
February 2nd, 2005 11:00
I am looking for any method other than using a usb floppy drive.
simpswr
3.2K Posts
0
February 2nd, 2005 11:00
Pat1
176 Posts
0
February 2nd, 2005 12:00
criz8426
You may not need a floppy drive. I just did a fresh install of Windows xp on a XPS Gen 4 using the Dell supplied cd and the sata drivers were on the cd. I did the F6 to add the drivers but the install informed me that I did not need them so I chose to use the drivers from the Win xp cd. The install went great on the Raptor hard drive I was adding to the system. Dell can be smart every once in a while. Give it a go and see what happens.
Pat
simpswr
3.2K Posts
0
February 2nd, 2005 12:00
wrs
Message Edited by simpswr on 02-02-2005 08:34 AM
reclinemusic
6 Posts
0
February 2nd, 2005 13:00
Pat!
You are doing exactly what I'm thinking of doing with my Gen3. I would like to get a raptor 74 GB and replace my current SATA hard drive with it. But the thing is, I would like to use my fresh, non-dell copy of windows XP to do it, because I'm afraid of all the non-essential stuff that dell puts on their copies of windows.
Are you noticing a lot of speed increases after installing the new raptor?
I'm mainly concerned with my RAM bandwidth right now. I have a friend with an AMD 64 3500, DDR400 - Dual Channel, and a raptor, and he is getting higher Memory Bandwidth scores with sandra than I am with a 3.4 GHz P4, DDR2-533 Dual-channel, and a 7200 SATA HDD. I know the hard drive wouldn't really be the problem here, but I think a fresh install of windows would really clean things up - memory usage-wise. And why do a fresh install of windows on the old HDD when I can get a spiffy new raptor (its just money after all : / )
So I guess I'm asking, do you think I would get any benefit from using a fresh, non-dell copy of windows to do my re-install? as opposed to using the copy that dell sent me? Also, is the raptor worth it? And any thoughts you might have on the memory bandwidth issue would be nice.
simpswr
3.2K Posts
0
February 2nd, 2005 15:00
I saw on one of the Boards, that a slipstreamed SP2 disc includes the SATA drivers . . anyone know if that is true?
wrs
Pat1
176 Posts
0
February 2nd, 2005 15:00
reclinemusic
I don`t think there is much difference between a retail version fo Windodws xp and a oem copy that comes with a Dell computer. Maybe some drivers but that is about it.
The Raptor is fast. I really notice the speed during the install process and when launching apps. When I installed windows it said it would take approximately 39 min but finished in 11 min. Am I pleased with it? You bet I am.
Pat
TTetpos
211 Posts
0
February 2nd, 2005 19:00
That is true. It will require a bit of work on your part though. Here's a link you can follow to get the document and see how it's done. Once you do this, you won't need a floppy drive when installing XP.
Slipstream XP w/ SATA Drivers
Note: your SATA drivers should be in the Dell Resource CD that came with your system.
Message Edited by TTetpos on 02-02-2005 04:19 PM
shesagordie
10 Elder
10 Elder
•
46K Posts
0
February 2nd, 2005 21:00
criz8426 wrote :
"however, the Dimension 8400's do NOT have a standard floppy driver controller (there is nowhere to even plug a floppy cable into the motherboard). Therefore I cannot use a conventional floppy drive without a usb conversion.
I am looking for any method other than using a usb floppy drive."
That is incorrect, the D8400 has both a floppy drive connector on the motherboard and the controller.
http://support.dell.com/support/edocs/systems/dim8400/SM/techov.htm#wp1052739
Bev.
Shadowrunner
2 Posts
0
February 3rd, 2005 21:00
TTetpos
211 Posts
0
February 4th, 2005 02:00
Shadowrunner
2 Posts
0
February 6th, 2005 13:00
dannylu88
1 Message
0
February 12th, 2005 00:00
LehighBri
91 Posts
0
April 15th, 2005 18:00