Solved!
Go to SolutionFW
fishermc-woffor
61 Posts
1
13847
July 12th, 2010 12:00
Solutions Enabler error
When trying to setup a remote connection to the Solutions Enabler Virtual Appliance via the vSphere console i get an error that says " Failed: The Remote Client/Server handshake failed."
When looking at the Storsrvd Logs on the Solution Enabler Virtual Appliance the log shows "Host Name Pattern in Certificae is not Valid"
Anyone know what to do to resolve this?
Thanks
2616
1
Posted July 12th, 2010 13:00
Primus emc242362 should help.
2610
0
Posted July 13th, 2010 05:00
are you using VSI 3.0 (with a patch)?
2616
0
Posted July 13th, 2010 05:00
OK thanks....any thoughts on the new error i posted?
Error(1000021):The connection to the remote STORAPI Server has been aborted.
1150
0
Posted July 13th, 2010 05:00
this error is on the virtual appliance when you try to discover Clariion ?
2616
0
Posted July 13th, 2010 05:00
Also,
I dont have any of this installed on the VC server,. I am doing it all from the workstation, is that ok or does this need to be installed on the VC server itself?
2616
0
Posted July 13th, 2010 05:00
OK i got that error fixed. Now i am getting a new error.
New Error:
StorArrayShow() failed. Error(1000021):The connection to the remote STORAPI Server has been aborted.
Any Ideas on this one?
Thanks
2616
0
Posted July 13th, 2010 05:00
it does not have to be, it can be installed on your workstation with VC client. You just need to make sure your workstation can talk to Clariion SPs.
974
0
Posted July 13th, 2010 06:00
Yes, they are showing in the Solutions Enabler Virtual Appliance
974
0
Posted July 13th, 2010 06:00
anything interesting in the base/storsrvd logs about the time you are trying to pull up information.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
2616
0
Posted July 12th, 2010 13:00
Do you have dashes in the name of your VC server ?