Trying to upgrade the BIOS on a Latitude 3330 as it is still on A0, the original firmware.
However, doesn't matter which newer version I try to upgrade with, A1 or A13 I have the same problem. I run the executable and it does the first part and then reboots to complete the process.
The problem is that this laptop does not do a clean reboot and will just sit at a black screen until I press the power button to power cycle it. Then once it starts up, whatever information it put ROM to load at restart is gone and no BIOS upgrade happens.
I've tried booting to Windows PE on a USB and running from a command prompt but then I get an error saying that the version of Windows is not compatible with the file.
So, I am stuck, caught in a loop. How to make it upgrade the BIOS when it won't restart gracefully?
Thanks for the suggestion Justin and I wish it was an option but I don't get that as an option on this laptop. The only options I get are BIOS Setup / Device Configuration / Diagnostics / Change Boot Mode Settings. I've scoured each of them hoping to find a flash option but nothing.
I've also run the boot diagnostics and full test and everything comes back as OK.
Justin C
6 Operator
•
783 Posts
6715
1
Posted June 3rd, 2019 16:00
@PaddyWork,
Try the following option and tell me what happens:
https://www.dell.com/support/article/us/en/04/sln305230/flashing-the-bios-from-the-f12-one-time-boot-menu?lang=en