
UNSOLVED
SSD OEM Setting
Hi,
I have a new Inspiron 14z 5423 and I upgrade from Windows Home Basic to Ultimate, but when i install the Intel Rapid Storage, after restarting, in Welcome Windows display, my laptop become BSoD. How to setting up the SSD correctly?
Responses (4)
Solutions (0)
yes... i recieve this laptop with Win7 Home Basics and configured with mSATA drive. but after i reinstall OEM, than i install the IRSTech, the system request me to restart the machine, after restart, at the Starting Windows my laptop become BSoD.
Im so happy that you reply my question..DELL-Ravi Ch
Moderator
•
7112 Posts
282
0
Posted March 30th, 2013 06:00
Hi Jedikanie,
Since you did not disable the acceleration before re-installing the operating system. I recommend that we reset the ISRT manually. Please follow the below given steps to reset it manually:
- Boot to Bios (F2)
- Change Sata operation to AHCI
- Save settings and Exit
- As soon as the system boots up tap the F8 key to go into Advanced options
- Choose option Repair my computer
- Wait for 3 – 5 minutes on the black screen until the system shows up recovery options
- On System Recovery option click next
- On user name / password option click next (if password has been set for primary user please enter the right password)
- On System Recovery Option screen ------> Select Command Prompt
- At Command prompt type in Diskpart
- Type LIST DISKà You should see 2 Disks listed like below
- Note down the right DISK number for the next steps. On some systems Msata HDD would be either Disk 1 or Disk 0
DISK ###
Status
Size
Free
Dyn
GPT
DISK 0
Online
29 GB
19 GB
DISK 1
Online
465 GB
5091 MB
-
-
Type SELECT DISK 0(Whichever is msata drive
-
It should say DISK 0 is selected
- Type Clean
- This should clean the msata HDD
- Type OFFLINE Disk
- This should make the Disk Offline
-
DISK ###
Status
Size
Free
Dyn
GPT
DISK 0
Offline
29 GB
19 GB
DISK 1
Online
465 GB
5091 MB
- Type EXIT
- RESTART
- On Restart go into BIOS (F2) and change SATA back to Intel Smart Response Technology
- Click save and exit and Restart
- Option Rom should pop up – Press Ctrl + I
- Press R to disable acceleration and 6 to Exit
- Boot into Windows Normally
Please check for the ISRT.

DELL-Ravi Ch
Moderator
•
7112 Posts
282
0
Posted March 26th, 2013 04:00
Hi Jedikanie,
I would like to know if your system came with mSATA drive configured. Please send me a private message with the computer's service tag so that I can check and suggest further steps.