I have two servers with dual network adapters intel i210 and a switch that connects them

I do not have vlan or other switch is set with the default parameters

i have only create lag1 and lag2 for connect nic

server1=   nic1 port and nic2 port on  lag id 1

server2=  nic1 port and nic2 port on lag is 2

on intel link aggregation i have test total mode for aggregation but  not reach 200mb/s

when copy file i see nic traffic and a nic transmits and the other receives a small data flow

i set intel nic on sla mode permanente aggregation next test lacp etc but not find solutions

�

help me

thanks

�

�

�