I should add that I want to see who is connected to each port on the switch. A sho arp doesn't return anything unless I ping the IP of the client. In my case I am setting up a new network remotely and will be using PXE to configure the servers, however can only do so if I know the MAC address of the client servers..

show bridge address-table

This only works if the servers have valid IP's. I need to get the MAC details so I can use PXE to install an OS onto the servers.

This only works if the servers have valid IP's. I need to get the MAC details so I can use PXE to install an OS onto the servers.