Hi,

I'm clearly being dumb here, but I don't seem to be able to get devices in different vlans to communicate with each other on my Dell PowerConnect 5548p.

I've set it up as follows.

Create VLAN20 and added port 4

Create VLAN30 and added port 6

All other ports are on VLAN1 as default and port 2 is used to connect to the rest of the network on the 192.168.0.0/24 subnet (including the internet router)

I've then added some ip addresses
192.168.0.246 VLAN1

192.168.20.246 VLAN20

192.168.30.246 VLAN30

Finally I've enabled the DHCP server and added two network pools

VLAN20 192.168.20.1 - 192.168.20.199

VLAN20 192.168.30.1 - 192.168.30.199

 

So, I then connect PC2 to port 4 and it is assigned IP address 192.168.20.1

and connect PC3 to port6 and it is assigned IP address 192.168.30.1

PC2 can ping all the interfaces on the switch, i.e. 192.168.0.246, 192.168.20.246 & 192.168.30.246, but not PC3 on 192.168.30.1 or the internet router on 192.168.0.1

PC3 is the same, just the other way round.

I've searched and advice seems to the be this should just work. (one posting suggested logging into the console and issuing the ip routing command, which I've done with no change).

Does anyone have any advice on what I might have missed.

Thanks in advance