Password Settings

The Wireless Broadband Router uses a password to authenticate the user before allowing changes to be made to any network settings.  If you would like to change the current password, check the Change Your Password checkbox and enter the new password in both New Password and Retype Password fields. Write down the password and keep it in a secure location for future reference.

• HTTP Port No.

Do not change the HTTP Port value unless you have reason to do so. Typically, web servers listen for incoming web requests on port 80.

• Allow remote user to configure the device

If you would like a remote user to be able to administer your Wireless Broadband Router over the Internet, check the box titled Allow remote user to configure the device. Enter the IP address for the remote administration host computer.

• Allow remote user to ping the device

Check the box Allow remote user to ping the device to enable your Wireless Broadband Router to be "ping"ed by any user on the Internet. This feature is helpful if you want to let other Internet users to check the status of your Wireless Broadband Router.

• Enable UPnP function

Look I know all that. I Have an APACHE-1.3.33 webserver running but my linksys router it was running behind just quit, the only one I had left that still works is a TrueMobile 2300, problem is now whenever i try to access my webserver from its Fully qualified domain name or its WAN IP the router will not let the request pass and just askes for username and password then goes to router administration! I need to know how to turn off the block WAN request. and changing port dont help, my router runs on port 8080 and i've tried ports 80 and 81 on my server.

I need this server back up and running ASAP!

Message Edited by THE-NERD on 06-01-2005 04:49 PM