UNSOLVED
Optiplex 7010 Power Supply Upgrade
Hi! I have an Optiplex 7010 MT, and I purchased a Gamdias Kratos M1-550b to put inside my system. I purchased this becuase I wanted to put a 1060 to make this a respectable budget gaming pc. When I plug in the psu and try to start it up, it gives me the flashing orange light on the power button. I googled what that means and apperently it means there is something wrong with the psu, but I purchased it brand knew and it is known good. If anyone knows why this happens or what other power supplies will work with this. Thanks a bunch in advance!
3558
0
Posted February 25th, 2021 11:00
3553
0
Posted February 25th, 2021 13:00
Power supplies are not a single spec of WATTS and a single rail of 12v
3.3v/5v combined rail must be 150w to 225W
EVGA 700BR is bare minimum for a 150W to 375W card.
https://www.evga.com/products/product.aspx?pn=100-BR-0500-K1
Note 150W combined for 3.3v/5v Rail and 24AMPS for 3.3v and 20AMPS for 5v
**********************************************************************
https://www.newegg.com/gamdias-kratos-m1-550b-550w/p/N82E16817311009
This gamidas kratos m1 550b is ATX
Items in red are not up to bare minimum spec.
- ATX12V v2.2 Not EPS12v 2.92
- Non-Modular
- 80 PLUS BRONZE Certified
- 100 - 240 V 47 - 63 Hz
+3.3V 15A, +5V 15A, +12V 43A , -12v .4A, 5vSB 2.5A
Even Dell 305W units are EPS12v
Note 150W combined for 3.3v/5v
- ATX12V v2.2 Not EPS12v 2.92
3536
0
Posted February 25th, 2021 20:00
this brand is new, but its 750w got good review.
try clear cmos if no post.
3514
0
Posted February 26th, 2021 10:00
Above linked PSU still only has 100w combined on the 3.3v/5v rails.
bradthetechnut
9 Technologist
•
9649 Posts
•
40713 Points
3560
0
Posted February 25th, 2021 10:00
Compare labels with your new and old PSU. New PSU probably doesn't have enough power on the 3.3v/5v rails.
Aftermarket PSU's often boast more total power, but skimp on the 3.3v/5v rails as compared to Dell PSU's, which are kind of special.
One of our Rockstars regularly recommends 700w EVGA B1 or BR PSU with 150w combined power on the aforementioned rails.
Beware of generic junk that can either not work or worse, damage a Dell PC.
Out of curiosity, have you tried your new PSU without the GPU card installed?