Hi

New to RecoverPoint seeing the following errors:

WARNING: 3 timeouts occurred during the past 60 minutes from hba_0 to 0x500601663ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

WARNING: 2 timeouts occurred during the past 60 minutes from hba_3 to 0x500601613ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

WARNING: 1 timeout occurred during the past 60 minutes from hba_3 to 0x500601653ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

WARNING: 2 timeouts occurred during the past 60 minutes from hba_1 to 0x500601653ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

WARNING: 7 timeouts occurred during the past 60 minutes from hba_2 to 0x500601663ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

WARNING: 6 timeouts occurred during the past 60 minutes from hba_2 to 0x500601643ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

WARNING: 2 timeouts occurred during the past 60 minutes from hba_0 to 0x500601643ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

WARNING: 1 timeout occurred during the past 60 minutes from hba_1 to 0x500601613ea01c4e. Possible causes: slow storage, bad Fibre Channel cable, or other connectivity issue. ; CAD ; RPA 2 in CAD

But when I check the FC Switch there are not Link Failure or Signal Loss Errors, the SAN is also not displaying any warnings about initiator loss.

Any Ideas what could be causing this