UNSOLVED
EL
Eric LawHK
1 Rookie
•
1 Message
0
3322
December 29th, 2020 23:00
NGTRiiAGE 27.3 Cannot process direcoty
Dear All
I had tried reinstall the software and run as admin on cli, but still fail. any idea ?
All SP log store in C:\EMC.
#############
Input specified: [ triage C:\EMC ]
Generating: [ 30 day ] TRiiAGE Analysis.
Processing directory: [ C:/Program Files (x86)/EMC/NGTRiiAGE ]
12/30/2020 15:23:14 Checking for VNXe-series SPcollects.
12/30/2020 15:23:14 Checking for CX/VNX-series SPcollects.
ERROR: Cannot process directory.
The directory either contains no SPcollects or service data files, or contains
files for more than one array or multiple files for one SP. NGTRiiAGE requires
that the directory contain either a single file or a matched pair (SPA and SPB)
from the same array. Metafiles that contain SPcollects or service data files
are subject to the same rules.
C:\Program Files (x86)\EMC\NGTRiiAGE>triage.exe C:\EMC
################
I have a similar problem, only the version is fresh, NGTRiiAGE 27.5.0. Additionally, I can say that in the "Processing directory" every time a runlog.txt file is created, in which the following info:
NGTRiiAGE-partner (eng) REV: 27.5.0 BUILD DATE: 100421
************************************************* *****************************'C: \ Program' is not recognized as an internal or external command,
operable program or batch file.
'C: \ Program' is not recognized as an internal or external command,
operable program or batch file.Any ideas?
DELL-Sam L
Community Manager
•
8118 Posts
•
34619 Points
1845
0
Posted October 13th, 2021 15:00
Hello Alex_PLX,
Which vnx system do you have as well as what is the current OE on your system?
My case - Unity. I understand that the branch is somewhat wrong, but it's not about the array, but about a similar error. I tried different operating systems, different 32/64 bit, different installation folders - the error persists. And what is interesting - NGTRiiAGE-partner_27.2.0 works fine on the same systems. Imho, this is an obvious software bug.
DELL-Sam L
Community Manager
•
8118 Posts
•
34619 Points
1826
0
Posted October 14th, 2021 09:00
Hello Alex_PLX,
Which unity system do you have as well as what is the current OE on your system?
DELL-Sam L
Community Manager
•
8118 Posts
•
34619 Points
1809
0
Posted October 15th, 2021 09:00
Hello Alex_PLX,
I would double check and ensure that the path value for the installation directory for NGTRiiAGE is correct.
1. Please run the command from the installation directory (i.e. D:\Program Files\EMC\symcli\bin) to see if it runs successfully.
2. Check the path value in Windows. Type PATH at the command line, it will show the current path variables.
3. Open a notepad and copy the PATH value to it.
4. Add the installation directory (D:\Program Files\EMC\symcli\bin) to the path value and paste the value to the cmd. You should be able to run the command under any directory.
JustANickname
4 Posts
1694
0
Posted October 29th, 2021 17:00
Faced similiar problem.
Ok, so it looks like the path of 'Program Files (x86)' wasn't properly escaped. Which results in
'C: \ Program' is not recognized as an internal or external command, operable program or batch file.
Though at the same time looks like path is hardcoded - i.e. no way to easily de-install and install with /DIR= option
Was the problem solved?
Hi,
Did anyone figure this out? I'm seeing the same issue with 27.5;
NGTRiiAGE-partner (eng) REV: 27.5.0 BUILD DATE: 100421
************************************************* *****************************'C: \ Program' is not recognized as an internal or external command,
operable program or batch file.hilmanpawerai
1 Rookie
•
3 Posts
727
0
Posted November 3rd, 2021 10:00
Hi,
I'm having a similar problem with 27.5.0
DELL-Josh Cr
Community Manager
•
9751 Posts
•
44575 Points
2045
0
Posted December 30th, 2020 06:00
Hi Eric,
Can you try copying one of the log files to a different directory and see if it will load from there?