Same as http://en.community.dell.com/techcenter/enterprise-client/f/4448/t/19422511.aspx I am using the samplesetbootorder.vbs, except my target PC is an optiplex 390 and I recieve an invalid parameter error on line 116:

c:\Drivers\samplesetbootorder.vbs(100, 2) SWbemObjectEx: Invalid parameter

I can successfully run the getbootorder script and the output is:

DCIM:BootSoureSetting:UEFI:BootListType-1:index-1       SATA: ST3250312AS    1        1
DCIM:BootSoureSetting:UEFI:BootListType-1:index-0       Diskette Drive                 2        1
DCIM:BootSoureSetting:UEFI:BootListType-1:index-3       USB Storage Device     3        1
DCIM:BootSoureSetting:UEFI:BootListType-1:index-4       CD/DVD/CD-RW Drive  4        1
DCIM:BootSoureSetting:UEFI:BootListType-1:index-5       Onboard NIC                   0        0

I want it to look like:

DCIM:BootSoureSetting:UEFI:BootListType-1:index-1       SATA: ST3250312AS      1       1
DCIM:BootSoureSetting:UEFI:BootListType-1:index-0       Diskette Drive                   0       0
DCIM:BootSoureSetting:UEFI:BootListType-1:index-3       USB Storage Device       0       0
DCIM:BootSoureSetting:UEFI:BootListType-1:index-4       CD/DVD/CD-RW Drive    0       0
DCIM:BootSoureSetting:UEFI:BootListType-1:index-5       Onboard NIC                     0       0

So I set the input for the array in the script to (not that it matters what I put here as the script errors out with same error regardless, although if this is incorrect for my desired outcome please let me know):

strNewOrderInput(0)="0"
strNewOrderInput(1)="1"
strNewOrderInput(2)="0"
strNewOrderInput(3)="0"
strNewOrderInput(4)="0"
strNewOrderInput(5)="0"

Line 116 is the last line displayed here, and I'm guessing that oInParams.source is returning something incorrectly but I can't get it to display with msgbox or wscript.echo.

Set ColSystem=objWMIService.execquery ("Select * from " & strClassName)
For each objInstance in ColSystem 
 Set oInParams= objInstance.Methods_("ChangeBootOrder").InParameters.SpawnInstance_
 oInParams.source = strNewOrder
 oInParams.AuthorizationToken = strAuthorizationToken
 Set returnValue = objInstance.ExecMethod_("ChangeBootOrder", oInParams)

My BIOS is the latest version A02, and I installed OMCI 8.0.1.150, and am running the script with a local administrative account. Also just recieved the batch of Dell 390s (SFF) early DEC. Any insight or information anyone could provide would be greatly appreciated. Thank you.