That SD Card was on an E1505n Ubuntu computer.

---

pepage wrote: That SD Card was on an E1505n Ubuntu computer.

---

I have not a problem with an SD card on the multi-card reader on my Ubuntu E1505N laptop. I only got it yesterday though and have only used it once so far.

---

@pepage wrote:
That SD Card was on an E1505n Ubuntu computer.

---

SD cards should work fine. memory sticks won't work, though, since no driver exists. What's the behavior you're seeing?

And how do I tell if these are loaded?

I took the SD card from my Axim, inserted in the slot of my E1505n and nothing happens. When I plug in my USB flash drive, I get an icon on my desktop.

Are the sdhci and mmc_core modules loaded?

`lsmod | grep sdhci`
`lsmod | grep mmc_core`

Open a terminal window, and type these commands.

lsmod | grep sdhci
lsmod | grep mmc_core

If you get nothing, they're not loaded. If this happens, type `sudo modprobe sdhci` and see if it works then

I am not doing well. Entered sudo modprobe sdhci on terminal and it asks for password. Tried to type in password and nothing happens. Can you tell I am new to Linux. Anyway, shouldn't these modules come preloaded?

Just read that when you type in your password it shows nothing. The first few times I entered my password it asked for the password again. Finally I was able to execute the sudo command, however, the problem was not the modules, it was me. I was not pushing the SD card it until I heard a click. Should have taken my nap today!

Entered command lsmod and sdhci/mmvc-core were listed. Now what is the linux command for >prn i.e. send lsmod to the printer?