Unsolved
This post is more than 5 years old
25 Posts
0
3161
April 30th, 2006 01:00
E510 "input not supported" before boot
This is a minor problem, but I've got an E510. I installed an EVGA 7600 GT card, and run 2 monitors, one DVI, and one VGA, using the adapter. When I power up the machine, the DVI monitor shows a message saying "input not supported". Then when windows boots up, it goes away, and works fine.
If I go into BIOS for example, that's there the whole time and I have to work around it. It floats around. Or I can use the other VGA monitor which is set to the side, and shows the same thing.
It all works, but it's a minor annoyance, and it didn't do this when I first got the machine.
Any thoughts?
If I go into BIOS for example, that's there the whole time and I have to work around it. It floats around. Or I can use the other VGA monitor which is set to the side, and shows the same thing.
It all works, but it's a minor annoyance, and it didn't do this when I first got the machine.
Any thoughts?
No Events found!
Gripen
2 Posts
0
April 30th, 2006 01:00
Hope you're able to get the problem fixed.
iFanboy
25 Posts
0
April 30th, 2006 03:00
http://www.newegg.com/product/product.asp?item=N82E16814130283
Didn't get a free game with it though....