UNSOLVED
T
tsangsitsong
2 Posts
0
30045
June 4th, 2009 11:00
Invalid configuration information - please run SETUP program
Please help..
My laptop is XPS M1210. Originally, the problem was that it refused to power on. So, I decided to replace the motherboard with a new one but to no avail. I then replaced the power board circuit which allowed the laptop to power on. However, as soon as it powered up. I received the message, "Invalid configuration informaton - please run SETUP porgram". I tried accessing the BIOS via F2 but this stubborn laptop did not respond. I am stuck with a black screen with this message. Please if anyone can help me I would greatly appreciate it.
tsangsitsong
2 Posts
2369
0
Posted June 4th, 2009 15:00
Thanks for very quick response! I will try it.
ejn63
11 Legend
•
87469 Posts
•
321256 Points
2369
0
Posted June 4th, 2009 12:00
Unplug the adapter, remove the battery, and hold the power button for 30 seconds, Then plug the system in and see if it'll boot. if it won't, chances are the replacement baord is faulty.