UNSOLVED
BIOS not update by SCCM
Hi
i try updating BIOS on Dell 3070 from 1.7.1 or 1.10.0 to 1.11.0 throught SCCM application.
command is this :
OptiPlex_3070_1.11.0.exe /s /r /l=C:\temp\bios1111.log /p=****
Command run , all looks OK computer restart and BIOS stay in old version.
There is log :
**************************************************
***Dell Firmware Update started on 12/14/2021 at 11:36:27***
Command: C:\WINDOWS\ccmcache\88\OptiPlex_3070_1.11.0.exe /s /r /l=C:\temp\bios1111.log /p=
SMB Table Address:1739ca0:148e
WSMT Supported: Using WMI commands.
Registry creation is Success at \SOFTWARE\DELL\FirmwareUpdate
Dell Firmware Update Utility Version: 4.2.24
------------------------------------------
Gigabit Ethernet : Current Version:BCD:0.1: --- New Version:BCD:0.1
System BIOS with BIOS Guard [V0]: Current Version:BCD:1.7.0: --- New Version:BCD:1.11.0
Intel Management Engine (Non-VPro) Update: Current Version:BCD:12.0.71.1681: --- New Version:BCD:12.0.81.1753
Bios Connect Exe Payload: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.4
Bios Connect Exe Version: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.4
------------------------------------------
Located the dedicated image or no dedicated image requested for this system.
Exit Code = 6 (Rebooting System)
***BIOS flash finished at 12/14/2021 at 11:36:54***
Where is problem ?
DELL-Cares
Moderator
•
27815 Posts
•
652 Points
1396
0
Posted June 28th, 2022 06:00
Hello, I see you are looking for technical assistance. If you need our help, you can start a private/direct message with us and we will be happy to assist you.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support Options, BIS (Bureau of Indian Standards) certificate, Get a copy of your Dell invoiceHaving the same issue with loads of 7420, BIOS 1.21.0
**************************************************
***Dell Firmware Update started on 12/5/2022 at 9:15:20***
Command: C:\ProgramData\Dell\UpdateService\Downloads\FOLDER09096327M\1\Latitude_7X20_1.21.0.exe /s /l="C:\ProgramData\Dell\UpdateService\UpdatePackage\log\Latitude_7X20_1.21.0.txt" /p=SMB Table Address:b7b908:18a4
WSMT Supported: Using WMI commands.
Registry creation is Success at \SOFTWARE\DELL\FirmwareUpdate
Dell Firmware Update Utility Version: 4.2.53
------------------------------------------
System BIOS with BiosGuard: Current Version:BCD:1.20.0: --- New Version:BCD:1.21.0
Intel Management Engine Corporate Firmware Update : Current Version:BCD:15.0.42.2235: --- New Version:BCD:15.0.42.2235
Integrated Sensor Hub: Current Version:BCD:5.4.1.4456: --- New Version:BCD:5.4.1.4456
Embedded Controller : Current Version:BCD:1.0.18: --- New Version:BCD:1.0.18
Backup Embedded Controller: Current Version:BCD:1.0.0: --- New Version:BCD:1.0.0
BiosConnect Core FV : Current Version:BCD:2.19.2: --- New Version:BCD:2.19.2
BiosConnect Wireless FV: Current Version:BCD:2.19.2: --- New Version:BCD:2.19.2
Intel TBT Retimer : Current Version:BCD:0.2.17: --- New Version:BCD:0.2.17
Intel TBT Retimer 2 : Current Version:BCD:0.2.17: --- New Version:BCD:0.2.17------------------------------------------
Located the dedicated image or no dedicated image requested for this system.Exit Code = 2 (Reboot Required)
***BIOS flash finished at 12/5/2022 at 9:16:11***KeyMaster2003
2 Intern
•
39 Posts
•
135 Points
186
0
Posted July 19th, 2023 11:00
Did you ever find a solution to this?
SupportJim
1 Message
1396
1
Posted June 28th, 2022 06:00
Same problem here, have you found a solution?
Looks like everything is fine, although the BIOS version remains the same.
Previous attempt: