Unsolved
This post is more than 5 years old
10 Posts
0
9061
March 18th, 2005 21:00
2005 FPW and light leakage
Well, I finally ordered and recieved my 2005fpw and it's pretty, but it does have some dead pixels and light leakage that so many have talked about. What I noticed that has not been posted here to my knowledge is that the corners where white light is showing through seem to be detatched a bit from the monitor frame. If you tap gently on the corner the screen moves in a tiny bit and the light gets even brighter. I noticed this when wiping the screen off with a cloth. I'm wondering if it's a shipping problem, being that the monitor screen is at the bottom of the box and only supported around its' edges? Or possible as the monitor warms up with use the plastic could expand a bit and let loose of the screen glass? It's worth looking into Dell.
I'm awaiting the shipment of my replacement anxiously because other than this flaw it seems to be one heck of a display.
I'm awaiting the shipment of my replacement anxiously because other than this flaw it seems to be one heck of a display.
No Events found!


steve_89
552 Posts
0
March 19th, 2005 01:00
B-
10 Posts
0
March 19th, 2005 02:00
1704_dude
11 Posts
0
March 19th, 2005 12:00
I bought the FP1704 and also get light leakage on the corners. But only noticeable when the
screen is totally black.
I also have an old TFT, and it has light leakage, but not on the corners, but on the L and R edges.
I guess leakages are normal in these monitors.
steve_89
552 Posts
0
March 20th, 2005 01:00