Hello, I have a puzzeling one for all of you today.  I have a IBM TS4500 Tape Silo the I use to put Networker to tape.  We seemed to have Hardware issues on the server I am working with a vendor.  

For our other server the tapes were working wiout any issues till Saturday when suddenly the tapes will not load.  I have recreated the device and rebooted the tape drive with no results.  Below are a few of the errors I am getting from Networker.  Any advice would be appreciated.

Tape2 Tape label read for volume ? in pool ?, is not recognized by Networker: Incorrect function. (Win32 error 0x1)

Retryable false operation: "Label"; operation options: "512"; operation response: "prompt"; operation slots: " 9"; operation template: "Bar Code Label"; operation volume pool: "Pool Name"; 71 label write, Incorrect function. (Win32 error 0x1)

 

Retryable false operation: "Label"; operation options: "512"; operation response: "prompt"; operation slots: " 9"; operation template: "Bar Code Label"; operation volume pool: "Pool Name"; label write, Incorrect function. (Win32 error 0x1) 74

Failed operation: "Label"; operation options: "512"; operation response: "prompt"; operation slots: " 9"; operation template: "Bar Code Label"; operation volume pool: "Pool Name"; false 5 Cannot allocate 1 devices needed for Label operation, number of available and usable devices = 0, check pool restrictions or device availability

Retryable operation: "Label"; operation options: "512"; operation response: "prompt"; operation slots: " 9"; operation template: "Bar Code Label"; operation volume pool: "Pool Name"; false 74 label write, Incorrect function. (Win32 error 0x1)

Thank You So Much!

Fred