Help

Start a discussion
UNSOLVED

globalgorrilla

updated

21 years ago

G

globalgorrilla

1 Message

0

4517

June 28th, 2005 08:00

MAC-Based VLANs

Does any body know an easy way to configure MAC-based VLAN's on the configuration below?

I would like to *not* have 3 x Static MAC Address tables. I would like to have MAC addresses associated with one or more VLANs, and *no* port association.

5348 (3 x 1000base uplink)
|||_________
||_____          |
|             |         |
|             |         |
3348 3348 3342
  • DR

    DELL-Randy

    132 Posts

    1592

    0

    Posted June 29th, 2005 16:00

    The MAC-to-VLAN configuration option is a new feature to the PowerConnect 3400 series switches.  The feature allows for the dynamic addition of an interface to a designated VLAN provided the device attached matches the MAC address specified in the configuration. 
     
    console# configure
    console(config)# vlan database
    console(config-vlan)# mac-to-vlan [MAC Address] [VLAN ID]
     
    Once the interface has joined the VLAN, any subsequent MAC Addresses learned are denied access, until the MAC Address that triggered the dynamic addition ages out of the CAM table.   The association is MAC-to-VLAN and the interface is only associated if a device with a MAC Address configured to a specific VLAN is attached.

Dell Support Resources

Latest Solutions

View More