UNSOLVED
system error 6118 in net view
I have a small home network with 2 desktops and a laptop inspiron 9300 wireless. Network was fine until a recent trip were we used the hotels wireless connection. Now I cannot access the home network. I get *****network is not accessible you may not have acess rights..... This is from the laptop only. I tried disabling the wireless and using the ethernet card and the same response. I tried using the net view command from the command prompt and received the system error 6118. I followed the directions from microsoft about adding ports to the firewall, and I still cannot see my network. If I go to start/run, and type in the IP address, everything is fine. I just cannot see the network through my network connections. Any suggestions to get this to work correctly. I have uninstalled both network cards, and reinstalled. I also renamed, and reconfigured the network, with no success.
Thanks
Dan
- I tried the safe mode, and still the same results. I changed the home page to the default page and still no change. Here is the listing when I run ipconfig /allWindows IP ConfigurationHost Name . . . . . . . . . . . . : FinelinePrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . . : Peer-PeerIP Routing Enabled . . . . . . .: noWNS Proxy Enabled . . . . . : noEthernet Adapter Wireless Network connection 2Connection-specific DNS Suffix . . :Description . . . . . . . . . . . . . . . . . . :Intel(R)/wireless 2200BG Network ConnectionPhysical addreess . . . . . . . . . . . . : 00-13-CE-22-14-A8Dhcp enabled . . . . . . . . . . . . . . . . : YesAuotconfiguration Enabled . . . . . . : YesIP Address . . . . . . . . . . . . . . . . . . : 192.168.0.101Subnet mask . . . . . . . . . . . . . . . . : 255.255.255.0Default Gateway . . . . . . . . . . . . . . :192.168.0.1DHCP Server . . . . . . . . . . . . . . . . :192.168.0.1DNS Server . . . . . . . . . . . . . . . . . : 192.168.0.1Lease obtained . . . . . . . . . . . . . . . : August 20, 2007 5:38:28 pmLease expires . . . . . . . . . . . . . . . . : August 27, 2007 5:38:28 pmEthernet Adapter Local Area ConnectionMedia state DisconnectedDescription Broadcom 440x 10/100 Integrated controllerPhysical address 00-12-3F-DF-E8-52Let me know if you need more infoThanksDan
- Your node type has been changed to peer to peer (it should be mixed). There are two possible ways to fix this.First try this - open Network Connections, right click your wireless connection, then select Properties. Click on the Wireless Networks tab, then click on the Advanced button. Where it says "Networks to access" make sure that "Any available network" is slelcted.If that doesn't work, try the suggestion involving editing the registry in the following post:Let us know which of these fixes the problem.Steve
- Thank you for your assistance. I was able to get the network visible and working after running through the registry editor. The only thing I am not sure of is that you said that the node type should be mixed, it is coming up now as "broadcast". The desktop pc's that I have show a node type as unknown.Thanks AgainDan
volcano11
2 Intern
•
27973 Posts
3355
0
Posted August 20th, 2007 00:00