
Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
Solved!
Go to SolutionEmulex firmware update fail
Hello,
Thanks for any help with this.
I'm using Lifecycle Controller to update firmware. It's worked well so far but i cannot get the Emulex card to update.
It's stuck on 02.00.04
I've disconnected the storage from the controller and rebooted and re-tried to upgrade a few times.
Anyone had this problem and resolved it? detailed error below.
Also, is anyone updating firmware for the power supply or CPLD? i don't think it was listed in the scan and update firmware wizard.
Many thanks,
I get the following error:
Event Message: Communication with Integrated RAID Controller 1 is intermittent.
Date/Time: Fri, 06 Dec 2019 16:07:05 -0600
Severity: Critical
Detailed Description: The controller is not receiving a consistent response from the enclosure. There could be a firmware problem or an invalid cabling configuration. If the cables are too long, they degrade the signal.
Recommended Action: Power down all enclosures attached to the system and reboot . If the problem persists, upgrade the firmware to the latest supported version. Verify the cable configuration is valid. See the storage hardware documentation for valid cabling configurations.
Message ID: ENC24
System Model: PowerEdge R730
Responses (0)
Solutions (0)
