Hi,

Problem is same as descripted in here:

http://en.community.dell.com/support-forums/servers/f/956/t/19273095

"Drac module doesn't respond to http or https requests"

I scanned servers IP with nmap and only ports 22 and 5900 are open.

So it is answering to ssh and telnet but not hosting web service.

Tried everything that was suggested in this thread.

http://community.spiceworks.com/topic/318572-drac-5-issue-not-responding-to-http-https

• soft reset (racadm racreset)
• hard reset (racadm racresetcfg)
• clearing RAC logs (racadm clrraclog)
• clearing SEL (racadm clrsel)
• updating firmware (RACADM FWUPDATE -g -p -a IP_ADDRESS)

So is there command to start web service or something else i should try before giving up and buying external kvm?