Well since you have a Perc 3di your options are limited.


That is if we even have a prolem with the raid array, it most likely could be something related to the controller driver.


I'd check with the CTRL-A bios (the second one for the raid controller)

Then container configuration utility.

MANAGE ARRAYS

then check the status of the raid array.


if your good to go there, if it shows optimal or online or whatever (been a while)...your raid array is fine. if you have multiple drive failures, then you may be in trouble.


We will cross that bridge when we get there.


Anyway the easy way to recreate the array and wipe the data is just to initilize the drives then go to create container...raid 5 etc.....it will scrub then you will be good to go, I'd let the scrub finish for good measure.