Unsolved
This post is more than 5 years old
2 Posts
0
10550
April 16th, 2004 16:00
Can't configure Clustering
I am trying to install windows 2003 clustering on a PowerVault 220s and a PowerEdge 2650 and when I complete the configuration wizard, it tells me that it could not bring the Quorum Disk online. I was reading on MS site that a user had to make some special configuration on the PowerVault/PowerEdge, but did not give details. Any ideas? The PowerVault is set to clustering.
0 events found
No Events found!
campwes
7 Posts
0
April 22nd, 2004 18:00
jrhiii,
You need to boot into the RAID controller BIOS to enable clustering (Management -> Objects -> Adapters). You also need to do this for each logical drive you've created. Of course, if you're using a PERC 3/Di or PERC 4/Di forget it. Those cards cannot be configured for clustering.
HTH,
campwes