Hi all,
We have 2 R710 with PERC H800 adapter + 1 R710 with simple 6 Gbps SAS HBA adapter (also Dell) and MD3200 with single RAID controller. The storage and the simple adapter works fine, but H800 adapters don't. All firmware and driver is up-to-date, storage can access all hosts with host identifiers, but in ws08r2 disk management mmc or in device manager can't see the virtual disks.
If I run OpenManage Server Admin and browse Storage section, I have a red cross at H800 adapter\Connector1\Health\Enclosure (Backplane). But there is one cable between adapter and storage at Connector 0 not 1. I tried reset adapters, changed cables, and a lot of things, but no results...