Solved!
Go to SolutionT5820 Samsung nvme install driver problem
Hello, i just upgraded my nvme ssd in the flexby with samsung 970 evo plus.
it works but samsung magician is saying that the correct driver is not installed!
It also says i need Samsung or Microsoft driver!
i tried to download the samsung drivers, but when i tried to install - it says NO Samsun driver attached!
Can somebody from Dell help me or i need to contact microsoft or Samsung for help?
Thank you!
3315
0
Posted September 30th, 2021 09:00
Please press the blue Accept as Solution button below if this post answers your question.
The driver will not install if the ssd is not physically in the unit via adapter or M2 SLOT that supports PCI-E x4 x8 x16
Secure boot must be OFF in bios or the drive will not be seen.
3317
0
Posted September 30th, 2021 09:00
@speedstep
i am already in AHCI mode...its not letting me install that driver3315
0
Posted September 30th, 2021 09:00
i think that i need to update the driver manually, but i cant find driver in zip file so i can add it from device manager....but that is what i think, maybe there is another solution
3317
0
Posted September 30th, 2021 09:00
Please press the blue Accept as Solution button below if this post answers your question.
Samsung Driver is specific.
You need to change default RAID to AHCI in F2 bios SATA Operation.
That will require reinstall or fixing the BCD.
This driver supports Samsung NVMe™ SSD 970 PRO, 970 EVO, 970 EVO Plus,
960 PRO, 960 EVO and 950 PRO.NVMe™ Driver
Version 3.3 4.72MB DOWNLOAD
SamsungNVMExpressDriver
NVMe™ Driver Installation Guide
678KB
Samsung_NVMeDriver_InstallationGuide3313
0
Posted September 30th, 2021 09:00
its in the flexbay, and its working, just not like its supposed so.
i had already a older nvme drive there, i just swapped it and i cloned the OS drive to the Samsung one....844
0
Posted September 30th, 2021 13:00
844
0
Posted September 30th, 2021 13:00
3295
0
Posted September 30th, 2021 13:00
If that is the case, now i know what is the problem and i wont worry that i did something wrong!
Thank you!
3293
0
Posted September 30th, 2021 13:00
i used that samsung data migration to clone the old ssd to the samsung 970 evo plus - and it worked great.
The weird thing is that the machine is recognizing the nvme as Samsung 970, and installs Intel drivers - not microsoft or Samsung...
Samsung Magician says the intel drivers are in use, and in order to be recognized, i must use Microsoft or Samsung drivers...so that is why i thought that i can update/replace the Intel with Microsoft one....
speedstep
11 Legend
•
46969 Posts
3298
0
Posted September 30th, 2021 13:00
@ichobmw
The Flex bay is not where the PCI-E M2 drive should be in order for ELAM to SEE the drive. MUST BE in PCI-E X4 X8 X16 slot.
PCI-E M2 Driver will not install without the M2 being in an X4 PCI-E slot. This is not a dell support issue.
If you do not put m2 into PCI-E slot it will not be seen in device manager nor will it be seen by the driver.
That step is not optional. Secure boot must be OFF for non dell hardware especially storage that is in the UEFI boot path.Early Launch Anti-Malware (ELAM) is a Windows security technology that evaluates non-Microsoft certified (Bios Certificates) WHQL boot time device hardware and software/application drivers for malicious code. This is UEFI system kernel that starts UEFI boot mode, before the OS loads. ELAM is a detection driver used to identify malware, root kits or other malicious code/drivers initiated at system startup. When a system starts, ELAM scans all third-party apps/drivers and sends the system kernel a report that includes all of the device/software drivers, which are classified as one of the following four groups: good, bad, bad but boot critical and unknown. This is why non dell hardware and drivers require secure boot OFF.