UNSOLVED
errors when using roxio or sonic
I have a dimension 8300 with a "hl-dt-st dvd+rw gra -4120b" device. Every time I use Roxoi Easy Media Creator 7 or Sonic to create a dvd or burn an ISO file, I get error messages. The disc pops out when using Sonic and a window says Error (that's all). When I use Roxio it immediately pops the disc out and says to use a proper format dvd+r at a 40.1x speed write capability. Well, I can't change the write speed.
I updated the driver and it still happens. What should I do?
307
0
Posted September 26th, 2005 16:00
Hi Pokey,
Click on the CD/RW link in my post and scroll to Section 15, article 1; Section 20, article 3; Section 12, article 10.
Next go to Section 15, article 14 and verify that the drive is running in DMA mode and not PIO mode.
Best Regards
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link
307
0
Posted September 26th, 2005 16:00
Yes, i already updated the firmware. now it says a new error. Something about "seek, synch, mechanical error..."
I still can't burn.
Thanks for helping.Message Edited by pokey825 on 09-26-2005 12:37 PM
Predator
2 Intern
•
15286 Posts
307
0
Posted September 26th, 2005 13:00
Hi Pokey,
Have you tried the
Dell Firmware for 4120B ?
Best Regards
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link