I really just assumed this is a hard drive issue. If it's something else, please let me know. Anyway, I had left my computer on for a long time, and when I came back the screen was blank. I shut off the computer, turned it back on, and now it reads, "No boot device available - Press F2 for setup," etc., everytime I turn it on. Does anyone know if this is fixable without Dell's service?
ok, first try reseating the hdd.
if that doesn't work then check to see if the hdd is seen in bios: you'll see the hdd capacity if it's seen.
if it's not seen after trying to reseat the hdd a few times then more than likely it's dead.
if it's seen in bios then you'll have to say what model laptop & what OS you're using.
suggest you try booting off the xp cd, going into the recovery console by pressing R at the appropiate time & using the fixboot &/or fixmbr command.
btw leave the password box empty & just press enter on the keyboard to gain access to the console.
Basically intermittently I get the primary HD failure message on my Inspiron 8500, so I check the BIOS and it is detected. It never fails during use i.e in Windows I can leave it on for days and nothing will happen.
However every other reboot I get HD failure this led me to think that the connector was only half connected, so I check and all looks okay but try reseating it anyway. Each time this failure happens I try all of these thing and eventually it boots and emphasis on eventually.
I have also tried updating the BIOS to the latest and run HD diagnostics on the drive which returns everything as fine
Beyond this I am stuck any ideas anyone ? please please please
bacillus
2 Intern
•
14378 Posts
565
0
Posted September 5th, 2004 08:00
if that doesn't work then check to see if the hdd is seen in bios: you'll see the hdd capacity if it's seen.
if it's not seen after trying to reseat the hdd a few times then more than likely it's dead.
if it's seen in bios then you'll have to say what model laptop & what OS you're using.